For my infrared project having the right subject to shoot was key. Infrared doesn’t work on every subject. Well, the actual process does, but the successful result is a bit more subjective. Some of the results I have seen published or on the web have often been a bit cliché, even if they work well within that cliché. So, I was looking for a subject that would suit the medium that perhaps hadn’t been done before, or was just less-photographed. In fact, this combination happened the other way around. I’d had the subject in mind for a while, but needed a technique to give it an edge. And so my Beyond the Grave idea was brought to fruition. I wanted to photograph cemeteries and the ‘Into the Red’ tag was the infrared medium I would capture them in.
The camera I used or should I say camera’s, were my Olympus EM1 and EP5. These are the camera’s I use for all my photography and they were actually ideal for this medium. The filter I used was a Hoya R72 Infrared filter. I purchased it in 67mm size, big enough for my standard zoom and I also purchased a couple of step-down rings so I could use it on other lenses too, if required.
This filter absorbs at least 10 stops of light, so it’s a bit like using a Big Stopper filter. This effectively means using the camera on a tripod, as the resulting exposures, even on the bright days, lasted several seconds. This was going to be one of a few downsides shooting with this filter rather than with a converted infrared camera, as I wouldn’t be able to get away with any handheld shooting. The other issue was movement. Subject blur from foliage, important for infrared, was not going to look very pleasing on the final result, so a lack of wind and therefore a calm day was preferred.
Now, as I say the OMD camera’s, especially the EM1 were ideal for shooting with this filter, as it avoids a third issue, composition. Because the filter is so dark, I would normally have to compose the scene without the filter in place, then once happy with my position, focus, screw the filter on and take the picture. If moved position again, I would normally have to take the filter off and repeat the process. Not so with the Olympus system. These cameras have a mode called Live Boost, which increases the intensity of the rear screen and electronic viewfinder view for when using strong filters such as this. This meant I could ‘see through’ the filter enough to compose and fine-tune the focus without forever taking the filter on and off. A godsend, I can tell you!
You can read more about infrared project shooting cemeteries in my eGuide ‘Beyond the Grave & into the Red’, available as part of an e6 Premium subscription. www.e6subscription.co.uk